F100 3.0.19e for MS-Windows and F100 Firmware 1.0.19e

Firmware changes since release 1.0.19c

• Fixed a bug that caused the fuzz command to run longer than expected when the total number of steps was relatively small (less than 10)
• Fixed a bug that caused backfreq on channel C not to work on some older F165s. (This happened only with firmware 1.0.19 to 1.0.19c)
• Added a feature to run a single frequency from the keypad with minimal key strokes. To run a frequency from the keypad do:

1)Tap number '5' key
2)Enter the frequency
3)Tap the "enter" key

The frequency will run for 24 hours or until you stop/hold/pause it.