F101 Frequency Generator Board

$400.00

Description

The F101 square wave frequency generator board  is a USB connected square wave generator. It can be driven from a PC, Mac or Linux computer. It can also run one program file in standalone mode, not connected to a computer.  The F101 needs to be connected to a computer via a USB port to be programmed using the F100 5.x software. Program files written for our F125/165/170 are compatible with the new F101.  Each generator  comes with a  USB connector.  The free F100 software and user guide can be downloaded directly from our web site.

F101 board specifications:

  • DDS square wave frequency generation controlled by internal 32 bit processor
  • MS-Windows, Mac and Linux F100 5.x software to control the F101 from a computer USB port.
  • All software can be freely downloaded from our web site in the downloads section
  • Program file format fully compatible with F100 4.x and our current generators: F125/165/170
  • 2 internal channels: A:2.5 MHZ, B:2.5 MHZ
  • 1 output 5 V TTL.
  • Channels A,B can be routed to the output in any combination.
  • Any of the 2 internal channels can be used as a carrier for the other channel.
  • Channel A,B frequency resolution (step size): .0009 HZ
  • Reference quartz oscillator stability: 50 ppm
  • Channels A,B duty cycle programmable in 64 (1.5625 %) steps.
  • Can be programmed to automatically load and run a program at powerup in standalone mode without the need for a PC.
  • Max output current 100 ma
  • Dimensions: 2.925 “x 4.7″ x 1”
  • 6ft USB cable included
  • Input power requirements: 12VDC 1A
  • One year warranty , parts and labor.