Description
The new F165i Available for order at the end of September 2024.
The new F165i square wave frequency generator can run standalone up to 1500 program files copied from a PC or Mac or Linux. It is also possible to connect the F165i to a computer via a USB port and control it with the F100 software.
F165 Specifications:
- Standalone DDS square wave frequency generation controlled by internal 32 bit processor
- MicroSD flash memory to store up to 1500 individual frequency program files
- Backlit LCD display (2 lines x 16 characters) and button uinterface to open/run files
- MS-Windows ,Mac OS X and Linux F100 software to copy files to the generator internal storage
- All software can be freely downloaded from our web site in the downloads section
- Quickly open recent programs or recent individual frequencies from the button interface.
- Program file format fully compatible with our previous generators
- 3 internal channels that can run frequencies from 0 HZ to: A:3.9 MHZ, B:3.9 MHZ, C:20 MHZ
- 2 external BNC ( I and II) output connectors, BNC I is 5 V TTL, BNC II is variable amplitude.
- BNC output I frequency range: 0 to 20 MHZ
- BNC output II frequency range: 0 to 20 MHZ
- Channels A,B,C can be routed to BNC outputs 1 or 2 in any combination (see note 2)
- Any of the 3 internal channels can be used as a carrier for the other two channels
- Channel A,B frequency resolution: .001 HZ
- Channel C frequency resolution: less than .0009 HZ (see Notes 1 and 3)
- Reference quartz oscillator stability: 50 ppm
- Channels A,B duty cycle programmable in 64 (1.5625 %) steps (when running in positive offset (DC) mode.
- Adjustable amplitude via front knob from 0-13VDC or 0-26VAC
- Programmable offset: Fully positive or AC centered at 0V
- Max output current 125 ma
- TTL output square wave frequency range: 0 to 20 MHZ
- Amplified output frequency range: 0 to 20 MHZ
- Amplified output full amplitude analog bandwitdth: 20 MHZ
- Amplified output short circuit protected
- Dimensions: 5″ x 5″ x 0.9″
- 6ft USB cable included
- 2.1 mm Input power connector
- Wall transformer provided with North American plug type. Compatible with 110VAC-240VAC 50-60HZ input.
- Power input: 2.1 mm, 12 VDC, 1A.
- One year warranty , parts and labor.
Note 1: The step resolution on channel C depends on the programmed frequency. It varies from .0009 to .000056 HZ. (see Note 3)
Note 2: The F165i has 3 independent internal frequency generators (A,B,C) and 2 BNC output connectors (1,2). A programmable multiplexer allows you to assign any internal channel(s) to any external BNC output(s) in any combination. For example, BNC connectors 1 or 2 can be individually programmed to output channels A , B, C, AB, AC, BC, ABC . When more than one internal channel is output from one of the BNC connectors, the channels are mixed with a logic AND operation.
All prices on our web site are is US dollars.
